THERMALHEART™ Double Glazed Sliding Door

The amazing ThermalHEART™ sliding door in Western Australia

THERMALHEART™ DOUBLE GLAZED SLIDING DOOR - SERIES 731

thermalheart sliding

Overview

Our Designer Series ThermalHEART™ sliding door system offers excellent thermal performance and stacking door configurations of up to 4 panels in each direction. The clean, bold frame design gives a modern aesthetic. A range of integrated screening options is also available.

Key Features

    • Series 731 incorporates ThermalHEART™ technology giving a true wide thermal break between the outside and inside faces. WERS (Window Energy Rating System) data shows that using the same IGU in a ThermalHEART™ awning is 32% more efficient than a standard non-thermally broken window

    • A major advantage with ThermalHEART™ in cold climates is the reduction in internal condensation. ThermalHEART™ is also suitable for hot climates
    • ThermalHEART™ will accept insulating glass units up to 32mm thick. The typical IGU thickness is 24mm
    • We offer ThermalHEART™ in a range of stocked colours including dual colour Clear MIST™
    • The door panels run on heavy-duty double bogey wheels as standard
    • For the ultimate finish, the perimeter frame has snap-in flat fillers to close off all unwanted recesses. These fillers are isolated to prevent thermal transmission from inside to outside
    • The flat sill is ideal for recessing into the floor finish
    • This sliding door has been tested for compliance with the relevant Australian Standards and achieved a high water resistance of 300Pa; this makes the product suitable for most residential applications. We also tested the maximum size door panels and ran them through to destruction to make sure
    • Low air infiltration suitable for air-conditioned buildings
    • The extra strong door stiles allow large door panels to be fabricated
    thermalheart 731
    • Maximum panel height -  2640mm
    • Maximum panel width -  1550mm
    • Maximum glass thickness -  32mm
    • WERS rated product
    • Enhanced acoustic performance
    • 3D and 2D CAD files for product
    • Specifier assistance available
    logo acoustics wer
    Subject to individual site conditions - Contact Nu-Look Technical Support for information.
    series 731 thermal break

    731 ThermalHEART Double Glazed Sliding Door

    The thermal breakthrough frame and on the flat filler is unique features of this highly efficient design and the frame is also available in a dual colour finish. 

    series 731 sill

    731 ThermalHEART Double Glazed Sliding Door

    The door sill can be completely recessed into the floor, and for the ultimate finish, you can fit a recessed gutter on the outside and a retractable roller screen on the inside.

    series 731 roller

    731 ThermalHEART Double Glazed Sliding Door

    These heavy doors are supported on custom double bogey wheels that are designed to support double glazed panels up to 150Kg in weight.

    series 618 lock

    731 ThermalHEART Double Glazed Sliding Door

    ICON™ heavy-duty bold pull handles with mortice lock.

    series 731 miro lock

    731 ThermalHEART Double Glazed Sliding Door

    MIRO™ pull handles with mortice lock are also available with the product.

    Typical door configurations

    thermalheart configurations

    WERS rated

    The table below lists some of the WERS rated glass and frame combinations for this system. For a complete list of all rated glass and frame combinations refer to the Series 731 WERS Data Sheet.
    thermalheart chart
    wer logo

    Call us today on 08 9330 2033 to find out more about our ThermalHEART™ sliding door

    Share by: