The ThermalHEART™ sliding door installed in Western Australia
THERMALHEART™ SLIDING DOOR - SERIES 731
The Designer Series ThermalHEART sliding™ door system offers excellent thermal performance and stacking door configurations of up to 4 panels in each direction. The clean, bold frame design gives a modern aesthetic and integrated screening options are available.
Series 731 incorporates ThermalHEART™ technology giving a true wide thermal break between the outside and inside faces. WERS (Window Energy Rating System) data shows that using the same IGU in a ThermalHEART awning™ is 32% more efficient than a standard non-thermally broken window.
A major advantage with ThermalHEART™ in cold climates is the reduction in internal condensation. ThermalHEART™ is also suitable for hot climates.
ThermalHEART™ will accept insulating glass units up to 32mm thick. The typical IGU thickness is 24mm.
We offer ThermalHEART™ in a range of stocked colours including dual colour Clear MIST™.
The door panels run on heavy-duty double bogey wheels as standard.
For the ultimate finish, the perimeter frame has snap-in flat fillers to close off all unwanted recesses. These fillers are isolated to prevent thermal transmission from inside to outside.
The flat sill is ideal for recessing into the floor finish.
This sliding door has been tested for compliance with the relevant Australian Standards and achieved a high water resistance of 300Pa; this makes the product suitable for most residential applications. We also tested the maximum size door panels and ran them through to destruction to make sure.
Low air infiltration suitable for air-conditioned buildings.
The extra strong door stiles allow large door panels to be fabricated.